One project for the chicken coop that I deferred until after they had moved in was a custom feeder and waterer for them.

I made them out of 2″ PVC piping, and other bits.  Firstly I drilled and filed holes in one piece of pipe, for the feeder:

I then assembled other pipe bits for both:

Here’s the waterer, in two pieces (so it could be inserted through the center wall hardware cloth). It uses drinker cups that dispense water when the chickens nudge the yellow tab:

Building a stand for both dispeners:

Both installed. The height is set for adult chickens, so I added a temporary platform so the chicks would be able to reach them:

Closeup of the feeder; I hope it works properly — I have a concern that the feed might not make it down the tube all that well, but we’ll see:

The waterer cups:

The feed and water bottles (only partially filled for now, just in case):