Duck island tweak

Only a little time to work on the duck island project yesterday (Weekend Wednesday). I spent about a third of the time planning the previously-mentioned upper platform, about a third changing my mind about the position of the pipes, obviating that platform, and a third moving the pipes. Read on for details.

Last time I wrote about the buoyancy of the island, and adding the ring of 4 inch pipes inside the frame as part of that. The plan was to add the dirt-containing pond liner over the top of the pipes, then build a third platform level on top of that. So I started by laying out some scraps of wood to prototype the platform:

Platform prototype

Another angle:

Platform prototype

But on further reflection, I thought that the position of the pipes was suboptimal… or not optimal for submarine buoyancy. As mentioned last time, I wanted the water level to be about halfway up the pipes, which seems a waste of the buoyancy potential of them… and with the expected weight of the island and dirt, I need every bit of buoyancy.

So I decided that the ring of pipes should be below the 2x4s, not above, i.e. underneath the island instead of within the surrounding frame. Which also means I probably won’t need the upper platform I’d just prototyped; the dirt can just go to the edge of the frame, as I’d originally envisioned.

Having decided that, I unscrewed the metal hanger straps and carefully removed the pipes:

Removed pipes

I then lifted the island onto an edge, so I could access the bottom:

Island on edge

Then mounted the pipes underneath:

Pipes underneath island

A closer view:

Pipes

A pipe strap:

Pipe strap

I also mounted a couple of the buckets, attaching them with heavy-duty fence staples:

Bucket

Maybe the last view of underneath the island, with the pipes and a couple of buckets:

Underneath

I didn’t attach the other two buckets, as they would get in the way of the cart. I can just tuck the buckets under there while installing; they’ll be contained by the wood and pipes.

Back down on to the cart:

Island

A closeup of a bucket and the pipes below the frame; the bucket will be lower down later; it’s just resting against the pipe for now:

Bucket and pipe

The current state of the island:

Back down on cart

So not as much progress as I’d hoped, but that’s fine; this was a worthwhile tweak.

Next time, hopefully, I’ll add the pond liner. But before that, I’m thinking I’ll add a few 1×2 strips to help support the liner, to prevent sagging.